Potter_Obsessed
It All Ends
About Me
- Crystal Belle
- Greer, South Carolina, United States
- I have been psping since 2004, I just started making scrap kits in 2010. In my spare time I love to read, Harry Potter and Twilight Saga are my favorite books, I also read anything true crime.Im a huge Harry Potter fan! I finished up my associates degree in Criminal Justice, September 2010. Im extremely proud of my self! Thank you for stopping by my blog :)
Monday, April 18, 2011
A Mothers Love
Posted by
Crystal Belle
You will need 1 picture of choice
I'm using one of my own
Scrap Kit By Laura's Designz called A Mothers Love.This is a PTU kit and you can get it from Taggers Delight
This tutorial will follow the scrap kit I used but any scrap kit will do.
Open up a canvas 700x700
Paste the Bracket Frame 2 and resize by 85%
Using your magic wand click inside the frame
Sections/modify/Expand by 3and paste your picture in the frame
Once you have your picture right go to Sections/invert and hit delete.
Now because I have a son I went ahead and added another frame behind my main frame
If you want to do this just follow these directions
Paste Bracket Frame 1
Move it below your picture and main frame layerResize by 90%
and rotate it to the left by 25 degrees
Go to adjust color balance and click on Manuel Color Correction change the Source color to/ #9379b4
Change the target color to #7a7cde click ok, and then go back in and do it again this time just click ok ( do not change the colors)
Now using your magic wand click inside the blue frame sections/modify/expand by 3
Paste paper 35 resize by 75% Sections/invert/delete
move this paper so it is under the blue frame
Go to adjust color balance and click on Manuel Color Correction change the Source color to/ ##ad9fbd Change the target color to #7a7cde
Add a drop shadow to the frame layer 2/2/50/2
Add the same drop shadow to the pink frame layer
Paste the Doodle #5 and resize it by 85
Move it so it shows a little bit up on the left of the bottom fame, and than move it to the bottom.
Go to adjust color balance and click on Manuel Color Correction change the Source color to/ #ad9fbd Change the target color to #7a7cde
Duplicate/mirror/flip
Go to adjust color balance and click on Manuel Color Correction change the Source color to/ #6259dd Change the target color to #deb5c1
Paste the ribbon heart 1 resize by 50 resize again by 75
Move this to the bottom of your frame on the left side
add the same drop shadow as before
Paste Satin Bow 3 resize by 50 and place it at the bottom of the top frame
add your drop shadow
Paste rose 3 resize by 50 and move it to the left of the pink frame and move it under the ribbon heart
Duplicate and rotate to the left by 25 degrees using your freehand section circle the pink rose and only the pink rose
Go to adjust color balance and click on Manuel Color Correction change the Source color to/ #ecdae1 Change the target color to/ #9badf1
Add the same drop shadow as before
Lets add your name
Font of choice I used Snapper Scriptstroke/fill/#5c54d1stroke width 2
I placed my name at the bottom of the bow
I added a gradient glow3/25/100Color/#5c54d1
Add the same glow again this time change the color to#dfb6c2
Delete out the White Background
Resize if needed and save as PNG
This tutorial was created on July/6th/2010 by Ċrÿstàlßellĕ of Belle of the Ball Tutorials and Scraps any resemblance to another Tag or Tutorial is purely coincidental.
Labels:
Cherry Bomb
Posted by
Crystal Belle
1Tube of Choice,
I'm using the wonderful art work of Keith Garvey. Which you must obtain a license to use at PTE
Scrap Kit By Designes by Ali called American Pride.This is a PTU kit and you can get it from Taggers Delight
This tutorial will follow the scrap kit I used but any scrap kit will do.
Open up a canvas 700x700Flood fill white
Paste DBA Frame #2resize by 65% Using your magic wand click inside the frame Sections/Modify/Expand by 3
Paste paper 21Sections/Invert/Delete Move this under the frame layer
Paste DBA Frame #3resize by 65% Go to Image and Mirror it
Move this so that it over laps the bottom of the first star
Using your magic wand click inside the frame Sections/Modify/Expand by 3
Paste paper 20Sections/Invert/Delete
Move this under the frame layer
Click on paper 21 in your first frame Effects/Texture/ Weave
Use these setting1/7/1/fill gaps checks
Make sure post colors are white
Do the same for the bottom paper also.
Close out all layers except both frames and both papers
Merge visible.
Copy and paste your tube of choice
Add a drop shadow2/2/50/2
Paste the Star Mess #3
resize by 85%Move it under your frame layersPaste Bow #7resize by 50#
Place it on the left hand side kind of on the edge where the 2 frames come togeather add the same drop shadow as before
Paste Butterfly #3resize by 50%resize again by 85%Move it so it sits on top of the bowadd the same drop shadow as before
Paste Doodle # 3resize by 50%Mirror the imageplace it at the bottom right of the bottom framePaste Doodle #3resize by 65%Rotate to the right 65 degreesMove it to the top left corner of the top frameAdd the same drop shadow to both doodles
Now lets add our nameFont I used is calledSilk Scritp AltSize 100Stroke-#760003Fill-#011b66I added a small graident glowwith these settings3/25/100Color White and I clicked on Fat Now add the same drop shadow as before
Add the Credit and your License Number is using PTU Delete out the White Background Resize if needed and save as PNG
This tutorial was created on June/26th/2010 by Ċrÿstàlßellĕ of Belle of the Ball Tutorials and Scraps any resemblance to another Tag or Tutorial is purely coincidental.
Glam Princess
Posted by
Crystal Belle
5 Tubes of Choice,
I'm using the wonderful art work of Keith Garvey. Which you must obtain a license to use at PTE
Scrap Kit By Tamie from ADDICTIVE PLEASURES called Glam Princess.
This is a PTU kit and you can get it from Twilight Scraps
Eye Candy 4000-Gradient Glow
This tutorial will follow the scrap kit I used but any scrap kit will do.
Open up a canvas 700x700
Paste the filmstrip and resize by 85%
Using your magic wand click in side the first frame.Sections/Modify/Expand by 3
Paste paper 11Sections/Invert/Delete
Move this under the frame layer
Contuine doing this for the next frames using a different paper.
Using your magic wand again click in side one of the frames Sections/Modify/Expand by 3
Paste your tube of choice Sections/Invert/Delete Move it under the frame layer
Contuine doing this for the next frames using a different tube each time.
Make sure your 5th tube is a tube that is laying down.
Place it at the top of the film strip
Paste ribbon 5 and move it to the bottom of all the layers
Place it to you can see it from the bottom of the filmstrip
add a drop shadow3/0/50/2
Paste the shoe2 resize it by 25% place it on the left side bottom filmstrip
Paste the sparklesmove it to the top of the filmstrip add a small gradient glow3/25/100#a6a9e2
Paste the Glitter resize by 75%
Move it to the very bottomDuplicate/Mirror
Paste Bow 6 resize by 45%Rotate to the left by 45
Move it to the top left of the filmstrip
Layers duplicate image mirror
At this time add any other elements you would like I added some makeup, and another ribbon at the bottom of the filmstrip
Using font of choice I used SandyTextHmkBoldSize 100 Stroke 1Forground/#f4c4e7Background/#a1ace2
Add the same drop shadow as before
Add the Credit and your License Number is using PTU Delete out the White Background
Resize if needed and save as PNG
This tutorial was created on February/26th/2010 by Ċrÿstàlßellĕ of Belle of the Ball Tutorials and Scraps any resemblance to another Tag or Tutorial is purely coincidental.
Sweet Dreams or Beautiful Nighmare
Posted by
Crystal Belle
2 Tubes of Choice, I'm using the wonderful art work of Elias Chatzoudis. Which you must obtain a license to use at PTE Collab Template #7 by Rose and Kristin. You can get this from ☠Toxic Desirez☠ Scrap Kit by PolkaDot Scraps by Chassity Kit is called Sweet Dreams Beautiful Nightmare this is a PTU kit from Twilight Scraps Ready, Lets get started! Open up the Rose and Kristin Collab template #7, Delete out the credit layer.Go to image/canvas size resite it to 700x700 Click on Layer 5 ~ Go to Adjust/Color Balance/Manuel Color CorrectionsUse these numbers H~152S~119L~137Make sure that the Color Source is the pink that is inside the circle, this way the color will be right. Still on this layer go to Sections/Select all/Float/Defloat copy and paste your tube of choice in side the circleSections/invert/delete. Change the Blend Mode to Soft LightClick on layer 3Sections/Select All/Float/DefloatSections/Modify x2Copy and paste PDS_SDBN-paper8Sections/invert/deleteClick on Layer 12 Go to Adjust/Color Balance/Manuel Color CorrectionsUse these numbers H~152S~119L~137 Click on the Source Color and use the light pink that is on this layer for this color. Click on Layer 11 Go to Adjust/Color Balance/Manuel Color Corrections Use these numbers H~152S~119L~137 Make the Source Color Light GreyDo the same thing for layer 4 Change the source color the Light Grey and use these numbersH~250S~211L~209 Click on Layer 10 Change the source color the color of the square and use these numbersH~243S~115L~210 Click on Layer 7Adjust/Add and Remove Noise/Add noise 50%Uniform ~CheckedMonochrome~ Unchecked Still on layer 7 Go to Adjust/Color Balance/Manuel Color CorrectionsUse these numbers H~152S~119L~137 Make the Source Color White Using these same settings go ahead and do this for Layers 16 and 17 Copy and paste your main tube place it where you think it looks best Add a drop Shadow with these settings2/-2/40/10 Copy and paste PDS_SDBN-Element14 Move this layer below your main tube layer and move it to the bottom of the template Copy and paste PDS_SDBN-Element2 resize by 50% and move it the left hand side of the square layer Copy and paste PDS_SDBN-Element43 Move it below all your on your template Place it towards the top so you can see it above the templates( You can refer to my tag) Copy and paste PDS_SDBN-Element56resize by 50%Go to Adjust/Color Balance/Manuel Color CorrectionsUse these numbers H~251S~109L~206 Make the Source Color White Rotate to the left by15% Copy and paste PDS_SDBN-Element27 resize by 50% Go to Adjust/Color Balance/Manuel Color CorrectionsUse these numbers H~152S~170L~219 Make the Source Color White Move it to the left side below the Beautiful layer Add the same drop shadow as before to both these layers. Copy and paste PDS_SDBN-Element23 resize by 50% move this to the top corner of the Rectangel, Duplicate this layer mirror and flip I also went ahead and added the black feather below the white one. And added the same drop shadow as before to both layer. Using your font of choice I used Angelina Size 72Stroke 2White/#f6b3bc Rotate to the left 15% and add the same drop shadow as before Add the Credit and your License Number if using PTU Delete out the White Background Resize if needed and save as PNG This tutorial was created on January/29th/2010 by Ċrÿstàlßellĕ of Belle of the Ball Tutorials and Scraps any resemblance to another Tag or Tutorial is purely coincidental.
Garv Rocks!
Posted by
Crystal Belle
5 Tubes of Choice,
I'm using the wonderful art work of Keith Garvey. Which you must obtain a license to use at PTE
Template #2 by Wicky Scraps you can get that from her blog Here Just scroll all the way down to the bottom.
Eye Candy 4000-Gradient Glow
Ready Lets get Started!!
Open up the Template Delete the WickyScraps Layer Make the Bottom Oval layer active go to Sections/Select all/Float/Defloat Copy and paste the Happy Time Paper 8 resize it by 75%
Sections/Invert/Delete Now Delete the Bottom Oval Layer
Add a drop Shadow 3/3/30/3
Make the Large Middle Rectangle active Sections/Select All/Float/Defloat Copy and paste the Happy Time Paper 6 Sections/Invert/Delete Delete the Large Middle Rectangle Layer Add the same Drop Shadow as before
Make the Top Rectangle layer active. Sections/Select All/Float/Defloat Copy and paste the Happy Time Paper 1 Sections/Invert/Delete Delete the Top Rectangle Layer Add the same Drop Shadow as before.
Make the 1st Photo Frame layer active. Sections/Select All/Float/Defloat Copy and paste the Happy Time Paper 10 Sections/Invert/Delete Do the same for the rest of the frames Add the same Drop Shadow as before.
Make the 1st Photo Mat layer active Sections/Select All/Float/Defloat Copy and paste the Happy Time Paper 4 Sections/Invert/Delete Do the same for the rest of the photo mats.
Now make sure you have the 1st Photo Mat layer active again. Sections/Select All/Float/Defloat Copy and paste your tube of choice Sections/Invert/Delete
Make sure the tube layer is below the frame layer but above the colored paper layer.
Do the same for the rest of the frame layers, with a different tube.
Now on each tube layer change the Blend Mode to Luminance (L)
Now go back to the frame layers and lets add some Noise Go to Adjust/Add/Remove Noise Add Noise with these Settings Uniform/Monochrome/Noise 21%
Now I went ahead and placed a laying down tube at the bottom of the template
This is completely up to you. If you do choose to place a tube there go ahead and add the same drop shadow as before
Now lets make the GARV layer active Sections/Select All/Float/Defloat Flood Fill with the color #fe83ab and add the same noise settings as before.
And add the same drop shadow as before On the Rocks layer I added a gradient glow with these settings 3/25/100 Under Color I used Fat and added the color #fe83ab in with it.
Add the same drop shadow as before.
Copy and paste the Happy Time Glitter element 1 (blue) Move this all the way below every layer but above the white background I placed mine at the top right corner of the frame ( You can refere to my tag for placement)
Now Copy the Happy Time Glitter 2 (pink) Now with this one when I copied and pasted I didnt move it much at all just a tad over to the right.
Copy and paste Happy Time Bow#9 resize by 45% Place it where you like,
I placed mine on the right side on one of the frames.
Add the same drop shadow as before.
Now lets add your name Using Font of choice I used Honey Script Size 72/Colors #fe83ab/#fed8df Add the same drop shadow as before.
Add the Credit and your License Number is using PTU
Delete out the White Background Resize if needed and save as PNG
This tutorial was created on December/30th/2009 by Ċrÿstàlßellĕ of Belle of the Ball Tutorials and Scraps any resemblance to another Tag or Tutorial is purely coincidental
Paparazzi
Posted by
Crystal Belle
Supplies Needed:
Tube of Choice :I'm using the wonderful artwork of Keith Garvey.which you must obtain a license to use at PTE
My template called Paparazzi: You can get this on my Blog
Scrap Kit by • BEL • VIDOTTI • SCRAPS • called Black and White
EyeCandy 4000: Graident Glow
Sparkle Doodle of choice
Font of Choice: Im using "Monika Upright"
Read lets get started!
Open up the Template Hit shift and D to duplicate it close out the original one.
1) Click on the Black Square Layer Sections/Select all/Float/Defloat Copy and paste Black and White Paper 6 Sections/Invert/Delete Delete out the Black Square Layer Add a Drop 2/2/40/10
2) Click on the Left Square Layer Sections/Select all/Float/Defloat Copy and paste Black and White Paper 2 Sections/Invert/Delete Delete out the Left Square Layer Add the same Drop Shadow as before.
3) Click on the Left Grey Square Layer Sections/Select all/Float/Defloat Copy and paste Black and White Paper 3 Sections/Invert/Delete Add the same Drop Shadow as before. Go to Adjust/ Add /Remove Noise Using these settings Uniform/Checked Monochrome/Checked Noise/55
4) Click on the layer called Paparazzi We are going to add a Soft Gradient Glow Using Eye Candy 4000: Gradient Glow with these settings 3/25/100 Under Color click on Thin and use #404040 Staying on that layer go to Adjust/ Sharpness/Sharpen This helps so it doesnt look so blury
5) Click on the Black Right Square Sections/Select all/Float/Defloat Copy and paste Black and White Paper 1 Sections/Invert/Delete Add the same Drop Shadow as before. Go to Adjust/ Add /Remove Noise Using these settings Uniform/Checked Monochrome/Checked Noise/55
6) Click on Copy of Raster 2 layer Sections/Select all/Float/Defloat Copy and paste your tube I had to rezixe mny tube by 110% to make her bigger Sections/Invert/Delete Drop the Opacity down to 50 Add the same drop shadow as before Now I placed a Sparkle from my Picture Tubes on the camera lens on my tube.
7) Click on Copy of Raster 2 layer again Sections/Select all/Float/Defloat Copy and paste Black and White Paper4 Sections/Invert/Delete Drop the Opacity down to 60
8) Copy and paste your tube of choice, If you are using the same tube as me You want to go ahead and go to Image/Mirror Add the same Sparkle on the camera as before Add the same Drop Shadow as Before
9) Copy and paste the Black and White Element 12 Keep this on top untill you move it over to the Left side of your frame Once you have it in place then go ahead and move it to the bottom Duplicate and Mirror this layer Close out all layers except the 2 background elements Merge these 2 layers togeather/ Duplicate/ Flip I moved my Duplicated layer up a bit so it wasnt hanging so far below the bottom frame
10) Copy and Paste the Element 2 ( Butterfly) Image/Resize/35% Move the Butterfly to the Right corner of your frame Image/Rotate/Left/45
11) Go ahead and add your name Font of Choice I used "Monika Upright" Size 80 Stroke #ffffff Fill #000000 Stroke Width/1
12) I added a Gradient Glow Same settings as before only this time change to color to #ffffff add it again and change the color to #000000 Add the Credit and your License Number is using PTU
Delete out the White Background Resize if needed and save as PNG
Hope you enjoyed this tutorial
This tutorial was created on October 7th by CrystalBelle of Belle of the Ball Tutorials any resemblance to another Tag or Tutorial is purely coincidental.
I would love to see your trys with this Tutorial so it can be featured on my Blog.
Subscribe to:
Posts (Atom)
Grab My Blinkie
Proud Member Of
People I Stalk
